Safety Tips

Aeropak Removable Rubber paint can be used to temporarily changing the colour of your entire car or certain parts of it; it's an easily applied and reversible paint job.
Aeropak Rubber paint is multi-purpose spray on rubber coating with excellent moisture, acid, alkaline & abrasion resistance. It protects against electrical shock, skidding/slipping & corrosion. For use on wood, metal, glass, rope, plastic, rubber, concrete & tools.

Features：No corrosion / Flexible / Stylish / Insulating / Non-slip

Touch dry time: around 15 min.
Hard dry time: around 2 hours. It’s peelable after dried inside.

IMPORTANT : Shake the can vigorously for one minute before use.
Spray Aeropak Foaming Tyre Care onto the tyres rubber wall to clean and shine, Leave for 10 mins to soak and then wipe clean with a clean cloth to remove any excess foam.

Using Aeropak Foaming Tyre Care produces a clean result with no scrubbing and adds clear protective film. A tip is to add a second coat after the first one dries.

Advantages & Features:

Tire Sealer & Inflator ( Tire Sealant) is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. One step procedure of tyre pumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire.

Notice
1. It is just for emergency use. Repair your punctured tire with rubber patch at your earliest possibility.
2. Keep away from heat, flame, spark and other source of ignition.
3. Store in a cool, dry place (45°C); Avoid direct sunlight.
4. Do not clash, puncture, or incinerate the can.
5. Keep out of reach of children.

Usage
1.lf possible remove the object causing punture
2.Keep the punctured part between 5-7 o'clock position
3.Shake the can well for about 30 seconds.
4.Screw connecting tube firmly onto tyre valve.
5. Hold the can upright,remove the protector cap,and press the button until tyre appears firm.
6. After pumping is finished,disconnect both ends of the tube.Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture .Then check and adjust tyre pressure.speed control ≤80km/h.

ldeal for use on: Clothing, Shoes, Tents,Tarps, Sleeping Bags, Ski/Snow Apparel, Backpacks, Gloves & Hats, Ropes & Canvas Covers

DIRECTIONS
1. Treated item must be clean and dry.
2. Test for color fastness on a hidden part of the item.- Treat fabric, then wet, wipe wet area with absorbent cloth to check waterproofing effect.
3. Shake can well before use, and every 3.5 minutes during use.
4. Hold can upright 15-20cm (6-8 in) from surface, spray with slow, sweeping motion, overlapping spray areas until evenly covered.
5. Allow surface to dry 12-24 hours before using or until solvent smell is gone.
6.  A second application will further enhance performance, making sure to include all seams and joins.
7. 12-24 hours after application test fabric with a few drops of water. If water soaks in re-apply. Re-apply after extended use. Do not use on plastic, vinyl, fiberglass or imitation suede.